LS1
LOGIC/MDB Interface
The LS1 is a small Logic (Micromech) to MDB converter enabling you to replace all Logic 24 or 117-volt coin changers with an MDB coin changer in addition to an MDB bill acceptor and even a card reader. The LS1 comes with its own power supply in order to energize more than one MDB device.
- Replaces all Logic coin changers
- Enables an MDB coin changer
- Enables an MDB bill acceptor
- Enables an MDB card reader
MS1
Multiprice/MDB Interface
The MS1 is a Multiprice to MDB converter enabling to replace all multiprice Coinco M type coin changer with an MDB coin changer as well as enabling the installation of an MDB bill acceptor and card reader. An MDB 1X16 LCD display is available as an option.
- Replaces all Multiprice coin changers
- Enables an MDB coin changer
- Enables an MDB bill acceptor
- Enables an MDB card reader
FS1/TS10
4/10 price Interfaces to MDB
The FS1 & TS10 interfaces are converter enabling you to install an MDB device into a 4-price machine (FS1) or a ten-price machine (TS10) thus replacing those old 24 or 115-volt coin changers. An MDB 1X16 LCD display is also available as an option.
- Replaces 4 and 10-price coin changers
- Enables an MDB coin changer
- Enables an MDB bill acceptor
- Enables an MDB card reader
SEM200
Conversion kit for SCM's Systems 200
This conversion kit includes an MEI or Coinco MDB bill acceptor. This kit enables you to remove the old System 200 or System 200C and install a state-of-the-art bill acceptor along with a special interface. Installing this conversion kit requires only few minutes and offers the same basic function as the original acceptor. The coin hopper stays the same. The kit comes with a small diagnosis light indicator indicating error codes.
- Quick and drill-free installation
- Replaces System S200 and S200C bill acceptor and stacker
- Uses a MEI or Coinco MDB protocol bill acceptor
SEM500
Conversion kit for SCM's Systems 500/500E
This conversion kit includes an MEI or Coinco MDB bill acceptor. This kit enables you to remove the old System 500 or System 500E and install a state-of-the-art bill acceptor along with a special interface. Installing this conversion kit requires only few minutes and offers the same basic function as the original acceptor. The coin hopper stays the same. The kit comes with a small diagnosis light indicator indicating error codes. Note that there cannot be more than two hoppers.
It fits the following models: SC61 or 62, SC101 or 102, and RL.
- Quick and drill-free installation
- Replaces System S500 and S500E bill acceptor and stacker
- Uses a MEI or Coinco MDB protocol bill acceptor
